Inventory

1. Inventory

Figure 10.1 Inventory.

Did you ever decide to start a healthy eating plan and meticulously plan your shopping list, including foods for meals, drinks, and snacks? Maybe you stocked your cabinets and fridge with the best healthy foods you could find, including lots of luscious-looking fruit and vegetables, to make sure that you could make tasty and healthy smoothies when you got hungry. Then, at the end of the week, if everything didn't go as you had planned, you may have discovered that a lot of your produce was still uneaten but not very fresh anymore. Stocking up on goods, so that you will have them when you need them, is only a good idea if the goods are used before they become worthless.

Just like with someone whose preparation for healthy eating can backfire in wasted produce, businesses have to balance a fine line between being prepared for any volume of inventory demand that customers request and being careful not to overstock those goods so the company will not be left holding excess inventory they cannot sell. Not having the goods that a customer wants available is bad, of course, but extra inventory is wasteful. That is one reason why inventory accounting is important.

---

Source: https://openstax.org/books/principles-financial-accounting/pages/10-why-it-matters
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 License.

1.1. Describe and Demonstrate the Basic Inventory Valuation Methods and Their Cost Flow Assumptions

Accounting for inventory is a critical function of management. Inventory accounting is significantly complicated by the fact that it is an ongoing process of constant change, in part because (1) most companies offer a large variety of products for sale, (2) product purchases occur at irregular times, (3) products are acquired for differing prices, and (4) inventory acquisitions are based on sales projections, which are always uncertain and often sporadic. Merchandising companies must meticulously account for every individual product that they sell, equipping them with essential information, for decisions such as these:

• What is the quantity of each product that is available to customers?
• When should inventory of each product item be replenished and at what quantity?
• How much should the company charge customers for each product to cover all costs plus profit margin?
• How much of the inventory cost should be allocated toward the units sold (cost of goods sold) during the period?
• How much of the inventory cost should be allocated toward the remaining units (ending inventory) at the end of the period?
• Is each product moving robustly or have some individual inventory items' activity decreased?
• Are some inventory items obsolete?

The company's financial statements report the combined cost of all items sold as an offset to the proceeds from those sales, producing the net number referred to as gross margin (or gross profit). This is presented in the first part of the results of operations for the period on the multi-step income statement. The unsold inventory at period end is an asset to the company and is therefore included in the company's financial statements, on the balance sheet, as shown in Figure 10.2. The total cost of all the inventory that remains at period end, reported as merchandise inventory on the balance sheet, plus the total cost of the inventory that was sold or otherwise removed (through shrinkage, theft, or other loss), reported as cost of goods sold on the income statement (see Figure 10.2), represent the entirety of the inventory that the company had to work with during the period, or goods available for sale.

Figure 10.2 Financial Statement Effects of Inventory Transactions. (attribution: Copyright Rice University, OpenStax, under CC BY-NC-SA 4.0 license)

Fundamentals of Inventory

Although our discussion will consider inventory issues from the perspective of a retail company, using a resale or merchandising operation, inventory accounting also encompasses recording and reporting of manufacturing operations. In the manufacturing environment, there would be separate inventory calculations for the various process levels of inventory, such as raw materials, work in process, and finished goods. The manufacturer's finished goods inventory is equivalent to the merchandiser's inventory account in that it includes finished goods that are available for sale.

In merchandising companies, inventory is a company asset that includes beginning inventory plus purchases, which include all additions to inventory during the period. Every time the company sells products to customers, they dispose of a portion of the company's inventory asset. Goods available for sale refers to the total cost of all inventory that the company had on hand at any time during the period, including beginning inventory and all inventory purchases. These goods were normally either sold to customers during the period (occasionally lost due to spoilage, theft, damage, or other types of shrinkages) and thus reported as cost of goods sold, an expense account on the income statement, or these goods are still in inventory at the end of the period and reported as ending merchandise inventory, an asset account on the balance sheet. As an example, assume that Harry's Auto Parts Store sells oil filters. Suppose that at the end of January 31, 2018, they had 50 oil filters on hand at a cost of $7 per unit. This means that at the beginning of February, they had 50 units in inventory at a total cost of $350 (50 × $7). During the month, they purchased 20 filters at a cost of $7, for a total cost of $140 (20 × $7). At the end of the month, there were 18 units left in inventory. Therefore, during the month of February, they sold 52 units. Figure 10.3 illustrates how to calculate the goods available for sale and the cost of goods sold.

Figure 10.3 Fundamentals of Inventory Accounting. (attribution: Copyright Rice University, OpenStax, under CC BY-NC-SA 4.0 license)

Inventory costing is accomplished by one of four specific costing methods: (1) specific identification, (2) first-in, first-out, (3) last-in, first-out, and (4) weighted-average cost methods. All four methods are techniques that allow management to distribute the costs of inventory in a logical and consistent manner, to facilitate matching of costs to offset the related revenue item that is recognized during the period, in accordance with GAAP expense recognition and matching concepts. Note that a company's cost allocation process represents management's chosen method for expensing product costs, based strictly on estimates of the flow of inventory costs, which is unrelated to the actual flow of the physical inventory. Use of a cost allocation strategy eliminates the need for often cost-prohibitive individual tracking of costs of each specific inventory item, for which purchase prices may vary greatly. In this chapter, you will be provided with some background concepts and explanations of terms associated with inventory as well as a basic demonstration of each of the four allocation methods, and then further delineation of the application and nuances of the costing methods.

A critical issue for inventory accounting is the frequency for which inventory values are updated. There are two primary methods used to account for inventory balance timing changes: the periodic inventory method and the perpetual inventory method. These two methods were addressed in depth in Merchandising Transactions).

Periodic Inventory Method

A periodic inventory system updates the inventory balances at the end of the reporting period, typically the end of a month, quarter, or year. At that point, a journal entry is made to adjust the merchandise inventory asset balance to agree with the physical count of inventory, with the corresponding adjustment to the expense account, cost of goods sold. This adjustment shifts the costs of all inventory items that are no longer held by the company to the income statement, where the costs offset the revenue from inventory sales, as reflected by the gross margin. As sales transactions occur throughout the period, the periodic system requires that only the sales entry be recorded because costs will only be updated during end-of-period adjustments when financial statements are prepared. However, any additional goods for sale acquired during the month are recorded as purchases. Following are examples of typical journal entries for periodic transactions. The first is an example entry for an inventory sales transaction when using periodic inventory, and the second records the purchase of additional inventory when using the periodic method. Note: Periodic requires no corresponding cost entry at the time of sale, since the inventory is adjusted only at period end.

A purchase of inventory for sale by a company under the periodic inventory method would necessitate the following journal entry. (This is discussed in more depth in Merchandising Transactions.)

Perpetual Inventory Method

A perpetual inventory system updates the inventory account balance on an ongoing basis, at the time of each individual sale. This is normally accomplished by use of auto-ID technology, such as optical-scan barcode or radio frequency identification (RFIF) labels. As transactions occur, the perpetual system requires that every sale is recorded with two entries, first recording the sales transaction as an increase to Accounts Receivable and a decrease to Sales Revenue, and then recording the cost associated with the sale as an increase to Cost of Goods Sold and a decrease to Merchandise Inventory. The journal entries made at the time of sale immediately shift the costs relating to the goods being sold from the merchandise inventory account on the balance sheet to the cost of goods sold account on the income statement. Little or no adjustment is needed to inventory at period end because changes in the inventory balances are recorded as both the sales and purchase transactions occur. Any necessary adjustments to the ending inventory account balances would typically be caused by one of the types of shrinkage you've learned about. These are example entries for an inventory sales transaction when using perpetual inventory updating:

A purchase of inventory for sale by a company under the perpetual inventory method would necessitate the following journal entry. (Greater detail is provided in Merchandising Transactions.)

Continuing Application

Inventory

As previously discussed, Gearhead Outfitters is a retail chain selling outdoor gear and accessories. As such, the company is faced with many possible questions related to inventory. How much inventory should be carried? What products are the most profitable? Which products have the most sales? Which products are obsolete? What timeframe should the company allow for inventory to be replenished? Which products are the most in demand at each location?

In addition to questions related to type, volume, obsolescence, and lead time, there are many issues related to accounting for inventory and the flow of goods. As one of the biggest assets of the company, the way inventory is tracked can have an effect on profit. Which method of accounting—first-in first-out, last-in first out, specific identification, weighted average— provides the most accurate reflection of inventory and cost of goods sold is important in determining gross profit and net income. The method selected affects profits, taxes, and can even change the opinion of potential lenders concerning the financial strength of the company. In choosing a method of accounting for inventory, management should consider many factors, including the accurate reflection of costs, taxes on profits, decision-making about purchases, and what effect a point-of-sale (POS) system may have on tracking inventory.

Gearhead exists to provide a positive shopping experience for its customers. Offering a clear picture of its goods, and maintaining an appealing, timely supply at competitive prices is one way to keep the shopping experience positive. Thus, accounting for inventory plays an instrumental role in management's ability to successfully run a company and deliver the company's promise to customers.

Data for Demonstration of the Four Basic Inventory Valuation Methods

The following dataset will be used to demonstrate the application and analysis of the four methods of inventory accounting.

Company: Spy Who Loves You Corporation

Product: Global Positioning System (GPS) Tracking Device

Description: This product is an economical real-time GPS tracking device, designed for individuals who wish to monitor others' whereabouts. It is marketed to parents of middle school and high school students as a safety measure. Parents benefit by being apprised of the child's location, and the student benefits by not having to constantly check in with parents. Demand for the product has spiked during the current fiscal period, while supply is limited, causing the selling price to escalate rapidly.

Specific Identification Method

The specific identification method refers to tracking the actual cost of the item being sold and is generally used only on expensive items that are highly customized (such as tracking detailed costs for each individual car in automobiles sales) or inherently distinctive (such as tracking origin and cost for each unique stone in diamond sales). This method is too cumbersome for goods of large quantity, especially if there are not significant feature differences in the various inventory items of each product type. However, for purposes of this demonstration, assume that the company sold one specific identifiable unit, which was purchased in the second lot of products, at a cost of $27.

Three separate lots of goods are purchased:

First-in, First-out (FIFO) Method

The first-in, first-out method (FIFO) records costs relating to a sale as if the earliest purchased item would be sold first. However, the physical flow of the units sold under both the periodic and perpetual methods would be the same. Due to the mechanics of the determination of costs of goods sold under the perpetual method, based on the timing of additional purchases of inventory during the accounting period, it is possible that the costs of goods sold might be slightly different for an accounting period. Since FIFO assumes that the first items purchased are sold first, the latest acquisitions would be the items that remain in inventory at the end of the period and would constitute ending inventory.

Three separate lots of goods are purchased:

Last-in, First-out (LIFO) Method

The last-in, first out method (LIFO) records costs relating to a sale as if the latest purchased item would be sold first. As a result, the earliest acquisitions would be the items that remain in inventory at the end of the period.

Three separate lots of goods are purchased:

IFRS Connection

Inventory

For many companies, inventory is a significant portion of the company's assets. In 2018, the inventory of Walmart, the world's largest international retailer, was 70% of current assets and 21% of total assets. Because inventory also affects income as it is sold through the cost of goods sold account, inventory plays a significant role in the analysis and evaluation of many companies. Ending inventory affects both the balance sheet and the income statement. As you've learned, the ending inventory balance is reflected as a current asset on the balance sheet and the ending inventory balance is used in the calculation of costs of goods sold. Understanding how companies report inventory under US GAAP versus under IFRS is important when comparing companies reporting under the two methods, particularly because of a significant difference between the two methods.

Similarities

• When inventory is purchased, it is accounted for at historical cost and then evaluated at each balance sheet date to adjust to the lower of cost or net realizable value.
• Both IFRS and US GAAP allow FIFO and weighted-average cost flow assumptions as well as specific identification where appropriate and applicable.

Differences

• IFRS does not permit the use of LIFO. This is a major difference between US GAAP and IFRS. The AICPA estimates that roughly 35–40% of all US companies use LIFO, and in some industries, such as oil and gas, the use of LIFO is more prevalent. Because LIFO generates lower taxable income during times of rising prices, it is estimated that eliminating LIFO would generate an estimated $102 billion in tax revenues in the US for the period 2017–2026. In creating IFRS, the IASB chose to eliminate LIFO, arguing that FIFO more closely matches the flow of goods. In the US, FASB believes the choice between LIFO and FIFO is a business model decision that should be left up to each company. In addition, there was significant pressure by some companies and industries to retain LIFO because of the significant tax liability that would arise for many companies from the elimination of LIFO.

Weighted-Average Cost Method

The weighted-average cost method (sometimes referred to as the average cost method) requires a calculation of the average cost of all units of each particular inventory item. The average is obtained by multiplying the number of units by the cost paid per unit for each lot of goods, then adding the calculated total value of all lots together, and finally dividing the total cost by the total number of units for that product. As a caveat relating to the average cost method, note that a new average cost must be calculated after every change in inventory to reassess the per-unit weighted-average value of the goods. This laborious requirement might make use of the average method cost-prohibitive.

Three separate lots of goods are purchased:

Comparing the various costing methods for the sale of one unit in this simple example reveals a significant difference that the choice of cost allocation method can make. Note that the sales price is not affected by the cost assumptions; only the cost amount varies, depending on which method is chosen. Figure 10.4 depicts the different outcomes that the four methods produced.

Figure 10.4 Comparison of the Four Costing Methods. One unit sold for $36. (attribution: Copyright Rice University, OpenStax, under CC BY-NC-SA 4.0 license)

Once the methods of costing are determined for the company, that methodology would typically be applied repeatedly over the remainder of the company's history to accomplish the generally accepted accounting principle of consistency from one period to another. It is possible to change methods if the company finds that a different method more accurately reflects results of operations, but the change requires disclosure in the company's notes to the financial statements, which alerts financial statement users of the impact of the change in methodology. Also, it is important to realize that although the Internal Revenue Service generally allows differing methods of accounting treatment for tax purposes than for financial statement purposes, an exception exists that prohibits the use of LIFO inventory costing on the company tax return unless LIFO is also used for the financial statement costing calculations.

Ethical Considerations

Auditors Look for Inventory Fraud

Inventory fraud can be used to book false revenue or to increase the amount of assets to obtain additional lending from a bank or other sources. In the typical chain of accounting events, inventory ultimately becomes an expense item known as cost of goods sold. In a manipulated accounting system, a trail of fraudulent transactions can point to accounting misrepresentation in the sales cycle, which may include

• recording fictitious and nonexistent inventory,
• manipulation of inventory counts during a facility audit,
• recording of sales but no recording of purchases, and/or
• fraudulent inventory capitalization,

to list a few. All these elaborate schemes have the same goal: to improperly manipulate inventory values to support the creation of a fraudulent financial statement. Accountants have an ethical, moral, and legal duty to not commit accounting and financial statement fraud. Auditors have a duty to look for such inventory fraud.

Auditors follow the Statement on Auditing Standards (SAS) No. 99 and AU Section 316 Consideration of Fraud in a Financial Statement Audit when auditing a company's books. Auditors are outside accountants hired to "obtain reasonable assurance about whether the financial statements are free of material misstatement, whether caused by error or fraud". Ultimately, an auditor will prepare an audit report based on the testing of the balances in a company's books, and a review of the company's accounting system. The auditor is to perform "procedures at locations on a surprise or unannounced basis, for example, observing inventory on unexpected dates or at unexpected locations or counting cash on a surprise basis". Such testing of a company's inventory system is used to catch accounting fraud. It is the responsibility of the accountant to present accurate accounting records to the auditor, and for the auditor to create auditing procedures that reasonably ensure that the inventory balances are free of material misstatements in the accounting balances.

Additional Inventory Issues

Various other issues that affect inventory accounting include consignment sales, transportation and ownership issues, inventory estimation tools, and the effects of inflationary versus deflationary cycles on various methods.

Consignment

Consigned goods refer to merchandise inventory that belongs to a third party but which is displayed for sale by the company. These goods are not owned by the company and thus must not be included on the company's balance sheet nor be used in the company's inventory calculations. The company's profit relating to consigned goods is normally limited to a percentage of the sales proceeds at the time of sale.

For example, assume that you sell your office and your current furniture doesn't match your new building. One way to dispose of the furniture would be to have a consignment shop sell it. The shop would keep a percentage of the sales revenue and pay you the remaining balance. Assume in this example that the shop will keep one-third of the sales proceeds and pay you the remaining two-thirds balance. If the furniture sells for $15,000, you would receive $10,000 and the shop would keep the remaining $5,000 as its sales commission. A key point to remember is that until the inventory, in this case your office furniture, is sold, you still own it, and it is reported as an asset on your balance sheet and not an asset for the consignment shop. After the sale, the buyer is the owner, so the consignment shop is never the property's owner.

Free on Board (FOB) Shipping and Destination

Transportation costs are commonly assigned to either the buyer or the seller based on the free on board (FOB) terms, as the terms relate to the seller. Transportation costs are part of the responsibilities of the owner of the product, so determining the owner at the shipping point identifies who should pay for the shipping costs. The seller's responsibility and ownership of the goods ends at the point that is listed after the FOB designation. Thus, FOB shipping point means that the seller transfers title and responsibility to the buyer at the shipping point, so the buyer would owe the shipping costs. The purchased goods would be recorded on the buyer's balance sheet at this point.

Similarly, FOB destination means the seller transfers title and responsibility to the buyer at the destination, so the seller would owe the shipping costs. Ownership of the product is the trigger that mandates that the asset be included on the company's balance sheet. In summary, the goods belong to the seller until they transition to the location following the term FOB, making the seller responsible for everything about the goods to that point, including recording purchased goods on the balance sheet . If something happens to damage or destroy the goods before they reach the FOB location, the seller would be required to replace the product or reverse the sales transaction.

Lower-of-Cost-or-Market (LCM)

Reporting inventory values on the balance sheet using the accounting concept of conservatism (which discourages overstatement of net assets and net income) requires inventory to be calculated and adjusted to a value that is the lower of the cost calculated using the company's chosen valuation method or the market value based on the market or replacement value of the inventory items. Thus, if traditional cost calculations produce inventory values that are overstated, the lower-of-cost-or-market (LCM) concept requires that the balance in the inventory account should be decreased to the more conservative replacement value rather than be overstated on the balance sheet.

Estimating Inventory Costs: Gross Profit Method and Retail Inventory Method

Sometimes companies have a need to estimate inventory values. These estimates could be needed for interim reports, when physical counts are not taken. The need could result from a natural disaster that destroys part or all of the inventory or from an error that causes inventory counts to be compromised or omitted. Some specific industries (such as select retail businesses) also regularly use these estimation tools to determine cost of goods sold. Although the method is predictable and simple, it is also less accurate since it is based on estimates rather than actual cost figures.

The gross profit method is used to estimate inventory values by applying a standard gross profit percentage to the company's sales totals when a physical count is not possible. The resulting gross profit can then be subtracted from sales, leaving an estimated cost of goods sold. Then the ending inventory can be calculated by subtracting cost of goods sold from the total goods available for sale. Likewise, the retail inventory method estimates the cost of goods sold, much like the gross profit method does, but uses the retail value of the portions of inventory rather than the cost figures used in the gross profit method.

Inflationary Versus Deflationary Cycles

As prices rise (inflationary times), FIFO ending inventory account balances grow larger even when inventory unit counts are constant, while the income statement reflects lower cost of goods sold than the current prices for those goods, which produces higher profits than if the goods were costed with current inventory prices. Conversely, when prices fall (deflationary times), FIFO ending inventory account balances decrease and the income statement reflects higher cost of goods sold and lower profits than if goods were costed at current inventory prices. The effect of inflationary and deflationary cycles on LIFO inventory valuation are the exact opposite of their effects on FIFO inventory valuation.

Link to Learning

Accounting Coach does a great job in explaining inventory issues (and so many other accounting topics too): Learn more about inventory and cost of goods sold on their website.

Think It Through

First-in, First-out (FIFO)

Suppose you are the assistant controller for a retail establishment that is an independent bookseller. The company uses manual, periodic inventory updating, using physical counts at year end, and the FIFO method for inventory costing. How would you approach the subject of whether the company should consider switching to computerized perpetual inventory updating? Can you present a persuasive argument for the benefits of perpetual? Explain.

1.2. Explain and Demonstrate the Impact of Inventory Valuation Errors on the Income Statement and Balance Sheet

Because of the dynamic relationship between cost of goods sold and merchandise inventory, errors in inventory counts have a direct and significant impact on the financial statements of the company. Errors in inventory valuation cause mistaken values to be reported for merchandise inventory and cost of goods sold due to the toggle effect that changes in either one of the two accounts have on the other. As explained, the company has a finite amount of inventory that they can work with during a given period of business operations, such as a year. This limited quantity of goods is known as goods available for sale and is sourced from

1. beginning inventory (unsold goods left over from the previous period's operations); and
2. purchases of additional inventory during the current period.

These available inventory items (goods available for sale) will be handled in one of two ways:

1. be sold to customers (normally) or be lost due to shrinkage, spoilage, or theft (occasionally), and reported as cost of goods sold on the income statement; OR
2. be unsold and held in ending inventory, to be passed into the next period, and reported as merchandise inventory on the balance sheet.

Fundamentals of the Impact of Inventory Valuation Errors on the Income Statement and Balance Sheet

Understanding this interaction between inventory assets (merchandise inventory balances) and inventory expense (cost of goods sold) highlights the impact of errors. Errors in the valuation of ending merchandise inventory, which is on the balance sheet, produce an equivalent corresponding error in the company's cost of goods sold for the period, which is on the income statement. When cost of goods sold is overstated, inventory and net income are understated. When cost of goods sold is understated, inventory and net income are overstated. Further, an error in ending inventory carries into the next period, since ending inventory of one period becomes the beginning inventory of the next period, causing both the balance sheet and the income statement values to be wrong in year two as well as in the year of the error. Over a two-year period, misstatements of ending inventory will balance themselves out. For example, an overstatement to ending inventory overstates net income, but next year, since ending inventory becomes beginning inventory, it understates net income. So over a two-year period, this corrects itself. However, financial statements are prepared for one period, so all this means is that two years of cost of goods sold are misstated (the first year is overstated/understated, and the second year is understated/overstated.)

In periodic inventory systems, inventory errors commonly arise from careless oversight of physical counts. Another common cause of periodic inventory errors results from management neglecting to take the physical count. Both perpetual and periodic updating inventory systems also face potential errors relating to ownership transfers during transportation (relating to FOB shipping point and FOB destination terms); losses in value due to shrinkage, theft, or obsolescence; and consignment inventory, the goods for which should never be included in the retailer's inventory but should be recorded as an asset of the consignor, who remains the legal owner of the goods until they are sold.

Calculated Income Statement and Balance Sheet Effects for Two Years

Let's return to The Spy Who Loves You Company dataset to demonstrate the effects of an inventory error on the company's balance sheet and income statement. Example 1 (shown in Figure 10.22) depicts the balance sheet and income statement toggle when no inventory error is present. Example 2 (see Figure 10.23) shows the balance sheet and income statement inventory toggle, in a case when a $1,500 understatement error occurred at the end of year 1.

Figure 10.22 Example 1. Assume these values to be correct (no inventory error). This chart shows excerpted values from The Spy Who Loves You Company's financial statements without inventory errors. (attribution: Copyright Rice University, OpenStax, under CC BY-NC-SA 4.0 license)

Figure 10.23 Example 2. Assume these values to be incorrect (with inventory error). This chart shows excerpted values from The Spy Who Loves You Company's financial statements with inventory errors. (attribution: Copyright Rice University, OpenStax, under CC BY-NC-SA 4.0 license)

Comparing the two examples with and without the inventory error highlights the significant effect the error had on the net results reported on the balance sheet and income statements for the two years. Users of financial statements make important business and personal decisions based on the data they receive from the statements and errors of this sort provide those users with faulty information that could negatively affect the quality of their decisions. In these examples, the combined net income was identical for the two years and the error worked itself out at the end of the second year, yet year 1 and year 2 were incorrect and not representative of the true activity of the business for those periods of time. Extreme care should be taken to value inventories accurately.