What is a Variable?

What is a variable?

A variable is a container for a value, like a number we might use in a sum, or a string that we might use as part of a sentence. Let's look at a simple example:

button id="button_A">Press me</button>
<h3 id="heading_A"></h3>

const buttonA = document.querySelector('#button_A');
const headingA = document.querySelector('#heading_A');
    
buttonA.onclick = function() {
   let name = prompt('What is your name?');
   alert('Hello ' + name + ', nice to see you!');
   headingA.textContent = 'Welcome ' + name;
}

In this example pressing the button runs some code. The first line pops a box up on the screen that asks the reader to enter their name, and then stores the value in a variable. The second line displays a welcome message that includes their name, taken from the variable value and the third line displays that name on the page.

To understand why this is so useful, let's think about how we'd write this example without using a variable. It would end up looking something like this:

<button id="button_B">Press me</button>
<h3 id="heading_B"></h3>

const buttonB = document.querySelector('#button_B');
const headingB = document.querySelector('#heading_B');
    
buttonB.onclick = function() {
   alert('Hello ' + prompt('What is your name?') + ', nice to see you!');
   headingB.textContent = 'Welcome ' + prompt('What is your name?');
}

You may not fully understand the syntax we are using (yet!), but you should be able to get the idea. If we didn't have variables available, we'd have to ask the reader for their name every time we needed to use it!

Variables just make sense, and as you learn more about JavaScript they will start to become second nature.

One special thing about variables is that they can contain just about anything – not just strings and numbers. Variables can also contain complex data and even entire functions to do amazing things. You'll learn more about this as you go along.

Note: We say variables contain values. This is an important distinction to make. Variables aren't the values themselves; they are containers for values. You can think of them being like little cardboard boxes that you can store things in.

Source: Mozilla, https://developer.mozilla.org/en-US/docs/Learn/JavaScript/First_steps/Variables#what_is_a_variable
This work is licensed under a Creative Commons Attribution-ShareAlike 2.5 License.

Declaring a variable

To use a variable, you've first got to create it – more accurately, we call this declaring the variable. To do this, we type the keyword var or let followed by the name you want to call your variable:

let myName;
let myAge;

Here we're creating two variables called myName and myAge. Try typing these lines into your web browser's console. After that, try creating a variable (or two) with your own name choices.

You can test whether these values now exist in the execution environment by typing just the variable's name, e.g.

myName;
myAge;

They currently have no value; they are empty containers. When you enter the variable names, you should get a value of undefined returned. If they don't exist, you'll get an error message – try typing in

scoobyDoo;

Initializing a variable

Once you've declared a variable, you can initialize it with a value. You do this by typing the variable name, followed by an equals sign (=), followed by the value you want to give it. For example:

myName = 'Chris';
myAge = 37;

Try going back to the console now and typing in these lines. You should see the value you've assigned to the variable returned in the console to confirm it, in each case. Again, you can return your variable values by typing their name into the console – try these again:

myName;
myAge;

You can declare and initialize a variable at the same time, like this:

let myDog = 'Rover'; 

This is probably what you'll do most of the time, as it is quicker than doing the two actions on two separate lines.

Updating a variable

Once a variable has been initialized with a value, you can change (or update) that value by giving it a different value. Try entering the following lines into your console:

myName = 'Bob';
myAge = 40;

An aside on variable naming rules

You can call a variable pretty much anything you like, but there are limitations. Generally, you should stick to just using Latin characters (0-9, a-z, A-Z) and the underscore character.

• You shouldn't use other characters because they may cause errors or be hard to understand for an international audience.
• Don't use underscores at the start of variable names – this is used in certain JavaScript constructs to mean specific things, so may get confusing.
• Don't use numbers at the start of variables. This isn't allowed and causes an error.
• A safe convention to stick to is so-called "lower camel case", where you stick together multiple words, using lower case for the whole first word and then capitalize subsequent words. We've been using this for our variable names in the article so far.
• Make variable names intuitive, so they describe the data they contain. Don't just use single letters/numbers, or big long phrases.
• Variables are case sensitive – so myage is a different variable from myAge.
• One last point: you also need to avoid using JavaScript reserved words as your variable names – by this, we mean the words that make up the actual syntax of JavaScript! So, you can't use words like var, function, let, and for as variable names. Browsers recognize them as different code items, and so you'll get errors.

Good name examples:

age
myAge
init
initialColor
finalOutputValue
audio1
audio2

Bad name examples:

1
a
_12
myage
MYAGE
var
Document
skjfndskjfnbdskjfb
thisisareallylongstupidvariablenameman

Try creating a few more variables now, with the above guidance in mind.

Variable types

There are a few different types of data we can store in variables. In this section we'll describe these in brief, then in future articles, you'll learn about them in more detail.

So far we've looked at the first two, but there are others.

Numbers

You can store numbers in variables, either whole numbers like 30 (also called integers) or decimal numbers like 2.456 (also called floats or floating point numbers). You don't need to declare variable types in JavaScript, unlike some other programming languages. When you give a variable a number value, you don't include quotes:

let myAge = 17;

Strings

Strings are pieces of text. When you give a variable a string value, you need to wrap it in single or double quote marks; otherwise, JavaScript tries to interpret it as another variable name.

let dolphinGoodbye = 'So long and thanks for all the fish';

Booleans

Booleans are true/false values – they can have two values, true or false. These are generally used to test a condition, after which code is run as appropriate. So for example, a simple case would be:

let iAmAlive = true;

Whereas in reality it would be used more like this:

let test = 6 < 3;

This is using the "less than" operator (<) to test whether 6 is less than 3. As you might expect, it returns false, because 6 is not less than 3! You will learn a lot more about such operators later on in the course.

Arrays

An array is a single object that contains multiple values enclosed in square brackets and separated by commas. Try entering the following lines into your console:

let myNameArray = ['Chris', 'Bob', 'Jim'];
let myNumberArray = [10, 15, 40];

Once these arrays are defined, you can access each value by their location within the array. Try these lines:

myNameArray[0]; // should return 'Chris'
myNumberArray[2]; // should return 40

The square brackets specify an index value corresponding to the position of the value you want returned. You might have noticed that arrays in JavaScript are zero-indexed: the first element is at index 0.

You'll learn a lot more about arrays in a future article.

Objects

In programming, an object is a structure of code that models a real-life object. You can have a simple object that represents a box and contains information about its width, length, and height, or you could have an object that represents a person, and contains data about their name, height, weight, what language they speak, how to say hello to them, and more.

Try entering the following line into your console:

let dog = { name : 'Spot', breed : 'Dalmatian' };

To retrieve the information stored in the object, you can use the following syntax:

dog.name

We won't be looking at objects any more for now – you can learn more about those in a future module.

Constants in JavaScript

Many programming languages have the concept of a constant – a value that once declared can't be changed. There are many reasons why you'd want to do this, from security (if a third party script changed such values it could cause problems) to debugging and code comprehension (it is harder to accidentally change values that shouldn't be changed and mess things up).

In the early days of JavaScript, constants didn't exist. In modern JavaScript, we have the keyword const, which lets us store values that can never be changed:

const daysInWeek = 7;
const hoursInDay = 24;

const works in exactly the same way as let, except that you can't give a const a new value. In the following example, the second line would throw an error:

const daysInWeek = 7;
daysInWeek = 8;

Summary

By now you should know a reasonable amount about JavaScript variables and how to create them.