## More on Number Systems

Read this article on how numbers can be represented in 1's and 0's that the computer can understand. Study the way numbers can be converted into other representations, like binary, 2's complement, and so on. Also be sure to watch the videos, including the one on floating point representation. Study the examples of binary addition to make sure you understand how it works.

#### Number systems and binary

Here are some informal notes on number systems and binary numbers.

#### Positional numbering system

Our normal number system is a positional system, where the position (column) of a digit represents its value. Starting from the right, we have the ones column, tens column, hundreds, thousands, and so on. Thus the number 3724 stands for three THOUSAND, seven HUNDRED, two TENS (called twenty), and four ONES. The values of those columns derive from the powers of ten, which is then called the base of the number system. The base ten number system is also called decimal.

There is nothing special about base ten, except that it's what you learned from a young age. A positional numbering system can use any quantity as its base. Let's take, for example, base five. In base five, the columns represent the quantities (from right to left) one, five, twenty-five, and a hundred twenty-five. We need to use five symbols to indicate quantities from zero up to four. For simplicity, let's keep the same numerals we know: 0, 1, 2, 3, and 4. The number shown in this figure, 3104 in base five, represents the same quantity that we usually write as 404 in base ten. That's because it is three × one hundred twenty-five (= 375), plus one × twenty-five (= 25) plus four ones (= 4), so 375 + 25 + 4 = 404.

You can count directly in base five; it looks like this: 0, 1, 2, 3, 4, 10, 11, 12, 13, 14, 20, 21, 22, 23, 24, 30, 31, 32, 33, 34, 40, 41, 42, 43, 44, 100. (Those correspond to quantities from zero to twenty-five.)

You should try counting and converting between other bases. Below is an interesting video overview of the dozenal (base twelve) number system.

#### Binary numbers

Computer systems use binary numbers – that just means they are in base two. Using two as the base is really convenient and flexible, because we need only two 'symbols' and there are so many ways we can represent them: zero/one, on/off, up/down, high/low, positive/negative, etc.

In binary, the columns are (from right to left) 1, 2, 4, 8, 16, 32, and so on. Using a zero means we exclude that column's quantity, and a one means we include it. So the binary number 10110 is the quantity 16 + 4 + 2 = 22. Each binary digit (a one or a zero) is called a bit. The largest five-bit binary number, then is 11111 = 16 + 8 + 4 + 2 + 1 = 31.

It's worthwhile to learn to count in binary, at least from zero to fifteen:

 0000 = 0    0100 = 4    1000 = 8    1100 = 12
0001 = 1    0101 = 5    1001 = 9    1101 = 13
0010 = 2    0110 = 6    1010 = 10   1110 = 14
0011 = 3    0111 = 7    1011 = 11   1111 = 15

#### Binary arithmetic

It's relatively easy to add numbers directly in binary. Line up the columns and then proceed from right to left, as usual. There are only four possible cases:

• If a column has no ones, write a zero below.
• If a column has one one, write a one below.
• If a column has two ones, write a zero and carry a one to the next column (to the left).
• Finally, if a column has three ones (possible due to an incoming carry), write a one and carry a one to the next column.

Below is an example of adding 10110 plus 11100. The result is 110010, and you can see the carry bits above the original numbers, in orange. When adding this way, it's always a good idea to check your work by converting the numbers to decimal and checking the addition. In this case, we're adding 22 (10110) to 28 (11100) to get 50 (110010).

#### Fixed-size binary numbers

We generally arrange numbers along a line, that goes off to infinity. Indeed, in binary we can always continue counting by adding more and more columns that are powers of two.

However, in most computer systems and programs we use fixed-size numbers. That is, we decide in advance how many bits will be used to represent the number. For example, a 32-bit computer represents most of its numbers and addresses using 32 bits. The largest such number is 2³²–1 = 4,294,967,295.

When your numbers have a fixed number of bits, then there is no number line heading off into infinity. Instead, we arrange the numbers around a circle, like a clock. Below is the number wheel for 3-bit integers. The smallest 3-bit integer is zero, and the largest is seven. Then, if you attempt to keep counting, it just wraps around to zero again. When you perform arithmetic with fixed-size numbers, you throw away any extra carry bit; the result cannot exceed the designated size. For example, see what happens if we try to add 110 + 011 using 3-bit integers: In 3-bit arithmetic, 6 plus 3 is 1. You can make sense of this on the number wheel. Addition corresponds to walking clock-wise around the wheel. So start at 6, and go clockwise by 3. That lands on 1, which is 6+3.

Below is a video about fixed-size binary numbers in old video games.

#### Signed magnitude

Now we'll look at signed numbers – that is, numbers that can be positive or negative. There are two techniques for encoding signed numbers. The first one is called signed magnitude. It appears simple at first, but that simplicity hides some awkward properties.

Here's how it works. We use a fixed width, and then the left-most bit represents the sign. So 4-bit signed magnitude looks like this:

 ___ ___ ___ ___
sign  4   2   1

where having the sign bit set to '1' means the magnitude is interpreted as negative. Thus, 0110 is +6 whereas 1110 is -6. In this system, the largest positive number is 0111 = +7 and the most negative number is 1111 = -7.

One of the unfortunate effects of this representation is there are two ways to write zero: 0000 and also 1000. There is no such thing as negative zero, so this doesn't really make sense.

#### Two's complement

The second way to represent signed quantities is called two's complement. Although this looks trickier at first, it actually works really well. Below is the interpretation of 4-bit two's complement. All we need to do compared to normal unsigned numbers is negate the value of the left-most bit.

 ___ ___ ___ ___
-8   4   2   1

So +6 is 0110 as before, but what about -6? We need to turn on the negative 8, and then add two: 1010. To represent -1, you turn on all the bits: 1111, because that produces -8+4+2+1 = -8+7 = -1.

The nice thing about two's complement is that you can add these numbers and everything just works out. Let's try adding 7 and -3:

 0 1 1 1 =  7
1 1 0 1 = -3
--------- ----
0 1 0 0 =  4

It's also relatively easy to negate a number – that is, to go from +6 to -6 or from -3 to +3. Here are the steps:

1. First, flip all the bits. That is, all the zeroes become ones and all the ones become zeroes.

For example here is how we produce -6 from +6:

 0 1 1 0 = + 6
1 0 0 1   (flip all the bits)
---------
1 0 1 0 = - 6

You don't even have to reverse these steps in order to convert back:

 1 0 1 0 = - 6
0 1 0 1   (flip all the bits)
---------
0 1 1 0 = + 6

Here's a cartoon from XKCD about counting sheep using two's complement! How many bits is this person using?

Finally, I want to introduce two number systems that are very useful as abbreviations for binary. They work so well because their bases are powers of two.

Octal is base eight, so we use the symbols 0–7 and the values of the columns are:

 ___ ___ ___ ___
512  64  8   1
8³   8²  8¹  8⁰

The real value of octal, however, is that each octal digit maps to exactly three binary digits. So, on octal number like 3714 maps as shown:

   3         7        1        4      octal number
0 1 1     1 1 1    0 0 1    1 0 0    binary number
(4 2 1    4 2 1    4 2 1    4 2 1)

Hexadecimal is base sixteen, so we use the symbols 0–9 and then A to represent ten, B for eleven, and so on up to F for fifteen. The values of the columns are:

____ ____ ____ ____
4096 256   16   1
16³ 16²   16¹  16⁰

So a hexadecimal number like 2A5C has the value 2×4096 + 10×256 + 5×16 + 12×1 = 10844 in base ten.

In hexadecimal, each digit maps to exactly four bits. So here is that same number in binary:

     2            A            5             C
0 0 1 0      1 0 1 0      0 1 0 1       1 1 0 0
(8 4 2 1      8 4 2 1      8 4 2 1       8 4 2 1)

Below are two great video overviews of hexadecimal. (Note when you watch these – the Brits often pronounce zero as 'naught'.)

#### Practice problems

1. Convert the following base ten (decimal) numbers into binary.

1. 6
2. 18
3. 51
4. 63
2. Convert the following unsigned binary numbers into base ten.

1. 1010
2. 1101
3. 1000
4. 10001
3. What do all odd numbers have in common, when written in binary? (Hint: try writing the quantities 3, 5, 7, 9, 11 in binary.)

4. Using 7-bit signed (two's complement) binary numbers, what is the largest positive number? What is the most negative number?

5. Convert the following 5-bit signed (two's complement) binary numbers into base ten.

1. 01101
2. 01111
3. 10011
4. 11111
6. Convert the following 16-bit binary number into hexadecimal, and then into octal.

0 1 1 1 1 1 1 1 0 0 1 1 1 0 1 0
7. Convert the following hexadecimal numbers into binary:

1. 9D
2. C4
3. A17E
8. Add and verify the following unsigned binary numbers.

  1 0 1 1 1 1        1 1 0 1 1 1
+   1 1 1 0 1      + 1 0 0 1 0 0
——————————————     ——————————————

Solutions here

#### Extra: floating-point  This work is licensed under a Creative Commons Attribution-ShareAlike 3.0 License.